You need to calibrate the PID for the bed. Use the following GCode:
M303 E-1 S60 C10 ; Run PID autotune on bed for 10 cycles
M304 P558.37 I109.94 D708.99 ; Replace with your results from autotune. These are what I got for mine.
M500 ; Save settings to EEPROM
Never run any firmware update without calibrating the PID for the bed and HotEnd.
Calibrate PID
Hi,
You need to calibrate the PID for the bed. Use the following GCode:
Never run any firmware update without calibrating the PID for the bed and HotEnd.