For this setup, the black/white wires of the BLTouch must be connected to the Z-Stop plug (not the 5 pin socket). You will also need to disable the jumpers for the sensorless homing in your board for the Z-Axis because it conflicts with the endstop switch.
Hello, For this setup, the…
Hello,
For this setup, the black/white wires of the BLTouch must be connected to the Z-Stop plug (not the 5 pin socket). You will also need to disable the jumpers for the sensorless homing in your board for the Z-Axis because it conflicts with the endstop switch.
Regards,