Add new comment

There are two zip files for download on the Article.
One for use with a BLTouch and one for machines without it.

And also the following instructions:

Instructions for installation from the binary files

  1. Download the package appropriate* to your hardware configuration.
  2. Open the ZIP file and extract the "firmware.bin" from "\.pio\build\STM32F103RE_btt_USB\" to an SD card (NOTE: This folder might be hidden in some operating systems)
  3. Insert the SD card in the printer and reboot to update the firmware.

* = With or  Without BLtouch.

This. But maybe you should read the other sections too.

The content of this field is kept private and will not be shown publicly.