Add new comment

Hi, I've downloaded the 1.1.9.1 Fix version and spent the afternoon trying it out. There is definetly something weird in the code. Simply printing a skirt around the object shows the Z-Axis getting higher and higher and higher rather than laying the layer down. It finishes 80-100mm up in the air.

I've auto-homed, manually levelled the bed, set the Z_PROBE_OFFSET time and time again, When I print a simple calibration print it (a large thing flat square, when the extruder goes to the back of the bed, it just goes higher and higher.

I think the base Marlin 1.1.9 code has a bug in it when used with the BLTouch V3.1 as I'm finding issues that other people don't have. I accept I might have a dodgy machine but this consistently odd. It does appear that most people don't seem have the BLTouch V3.1 and have earlier versions which might have something to do with it.

I'm going to comment out ENABLE_LEVELING_FADE_HEIGHT and see if that does anything to help.

Rob

The content of this field is kept private and will not be shown publicly.